JET install root config

2008-01-11T00:08:58Z

Jetmark:

[[Jet_Installation_Recipe|Parent]]

==install_root_config==

#!/usr/bin/ksh

if [ ! -d "/var/tmp/my_custom" ] ; then
cd /var/tmp; /bin/tar -xf my_custom.tar
fi

if [ ! -d "/var/tmp/my_custom" ] ; then
exit
fi

cd /var/tmp/my_custom
cd root
cp -r .ssh .cshrc .hushlogin /

grep -v ^root: /etc/passwd > /tmp/passwd.noroot
echo "root:x:0:0:Super-User:/:/bin/tcsh" > /etc/passwd
cat /tmp/passwd.noroot >> /etc/passwd
chmod 644 /etc/passwd
chmod 644 /etc/hosts
chmod 644 /etc/rpc
chmod 644 /etc/services
chmod 644 /etc/group
chmod 644 /etc/syslog.conf
echo "ClientAliveInterval 100" >> /etc/ssh/sshd_config

JET install root config

2008-01-11T00:07:42Z

Jetmark:

JET host hostf01

2008-01-10T06:57:10Z

Jetmark:

[[Jet_Installation_Recipe|Parent]]

==hostf01 JET Configuration==

Add all the IPs for the host to /etc/hosts on the jumpstart server.

192.168.174.68 hostf01-g0
192.168.174.69 hostf01-g1
192.168.174.70 hostf01
192.168.174.71 hostf01-zone1
192.168.174.122 hostf01-zone2
192.168.174.123 hostf01-zone3
192.168.174.124 hostf01-zone4
192.168.105.3 hostf01-g2
192.168.105.4 hostf01-g3
192.168.105.5 hostf01-stor

Add the IPs for the host to /data/dns/db.192.168.174 and /data/dns/db.test.example.com on your DNS server. (Pathnames may vary of course).

/data/dns/db.192.168.105
db.192.168.105:3 PTR hostf01-g2.test.example.com.
db.192.168.105:4 PTR hostf01-g3.test.example.com.
db.192.168.105:5 PTR hostf01-stor.test.example.com.

/data/dns/db.192.168.174
68 PTR hostf01-g0.test.example.com.
69 PTR hostf01-g1.test.example.com.
70 PTR hostf01.test.example.com.
71 PTR hostf01-zone1.test.example.com.
122 PTR hostf01-zone2.test.example.com.
123 PTR hostf01-zone3.test.example.com.
124 PTR hostf01-zone4.test.example.com.

/data/dns/db.test.example.com
hostf01-g0 IN A 192.168.174.68
hostf01-g1 IN A 192.168.174.69
hostf01 IN A 192.168.174.70
hostf01-zone1 IN A 192.168.174.71
hostf01-zone2 IN A 192.168.174.122
hostf01-zone3 IN A 192.168.174.123
hostf01-zone4 IN A 192.168.174.124
hostf01-g2 IN A 192.168.105.3
hostf01-g3 IN A 192.168.105.4
hostf01-stor IN A 192.168.105.5

dnshost:/ root# rndc reload

Tune the jumpstart_config.pl script for the host specific details. This script should always be run before any make_client command is executed.

jumphost:/ root# vi /var/tmp/jumpstart_config.pl
&setup_host_conf("hostf01", "base_config_sysidcfg_default_route", '"192.168.174.65"');
&setup_host_conf("hostf01", "base_config_nodename", '"hostf01"');
&setup_host_conf("hostf01", "base_config_defaultrouter", '"192.168.174.65"');
&setup_host_conf("hostf01", "zones_names", '"hostf01-zone1 hostf01-zone2 hostf01-zone3 hostf01-zone4"');
&setup_host_conf("hostf01", "base_config_ipmp_networkifs", '"e1000g0_e1000g1 e1000g2_e1000g3"');
&setup_host_conf("hostf01", "base_config_ipmp_networkif_e1000g0_e1000g1", '"ipmp0 s 192.168.174.68 192.168.174.69 26 hostf01 192.168.174.70"');
&setup_host_conf("hostf01", "base_config_ipmp_networkif_e1000g2_e1000g3", '"ipmp1 s 192.168.105.3 192.168.105.4 27 hostf01-stor 192.168.105.5"');
&setup_host_conf("hostf01-zone1", "custom_packages", '""');
&setup_host_conf("hostf01-zone1", "base_config_nodename", '"hostf01-zone1"');
&setup_host_conf("hostf01-zone2", "custom_packages", '""');
&setup_host_conf("hostf01-zone2", "base_config_nodename", '"hostf01-zone2"');
&setup_host_conf("hostf01-zone3", "custom_packages", '""');
&setup_host_conf("hostf01-zone3", "base_config_nodename", '"hostf01-zone3"');
&setup_host_conf("hostf01-zone4", "custom_packages", '""');
&setup_host_conf("hostf01-zone4", "base_config_nodename", '"hostf01-zone4"');

Create the templates for the zones and host

/var/tmp/jumpstart_config.pl
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone1 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone2 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone3 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone4 base_config custom sbd explo
make_template -f -A sun4v -O OS10_SPARC_807 -E 00:14:4F:AA:BE:EF hostf01 base_config custom sds explo san jass zones sbd
/var/tmp/jumpstart_config.pl
make_client -f -N hostf01-zone1
make_client -f -N hostf01-zone2
make_client -f -N hostf01-zone3
make_client -f -N hostf01-zone4
make_client -f -N hostf01

Install custom files and scripts to adjust the host after installation

<DL><DD>[[JET_install_root_config|install_root_config]]</DD><DL>
<DL><DD>[[JET_install_sysadmin_config|install_sysadmin_config]]</DD><DL>
<DL><DD>[[JET_install_sudo_config|install_sudo_config]]</DD><DL>
<DL><DD>[[JET_no_zone_sysidcfg|no_zone_sysidcfg]]</DD><DL>
<DL><DD>[[JET_my_custom.tar|my_custom.tar]]</DD><DL>

cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone4

Check the hosts built OK

check_client hostf01-zone1
check_client hostf01-zone2
check_client hostf01-zone3
check_client hostf01-zone4
check_client hostf01

At the OBP prompt network boot the machine, skipping the windowing system. Note: You will need to 'init 6' it once during the boot process (for unknown reasons) when it pauses at the root prompt.

ok# boot net:dhcp - install nowin

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef, Host ID: 84aabeef.

Boot device: /pci@780/pci@0/pci@1/network@0:dhcp File and args: - install nowin
1000 Mbps full duplex Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps full duplex Link up
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Configuring devices.
Using DHCP for network configuration information.
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
Setting up Java. Please wait...
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file /sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
Starting remote procedure call (RPC) services: done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 192.168.100.14:/opt/SUNWjet.
Checking rules.ok file...
Using begin script: Utils/begin
Using derived profile: Utils/begin
Using finish script: Utils/finish
Executing JumpStart preinstall phase...
Executing begin script "Utils/begin"...
Installation of hostf01 at 17:48 on 02-Jan-2008
Loading JumpStart Server variables
Loading JumpStart Server variables
Loading Client configuration file
Loading Client configuration file
BASE_CONFIG: Running base_config begin script....
BASE_CONFIG: Running base_config begin script....
CUSTOM: Running custom begin script....
CUSTOM: Running custom begin script....
Begin script Utils/begin execution completed.
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.

Processing default locales
- Specifying default locale (en_AU.ISO8859-1)

Processing profile
- Selecting cluster (SUNWCall)
- Deselecting cluster (SUNWCpm)
WARNING: Unknown cluster ignored (SUNWCpmx)
- Deselecting cluster (SUNWCdial)
WARNING: Unknown cluster ignored (SUNWCdialx)
- Deselecting cluster (SUNWCaudd)
- Deselecting cluster (SUNWCstaroffice)
- Deselecting cluster (SUNWCpostgr)
- Deselecting cluster (SUNWCpostgr-dev)
- Deselecting cluster (SUNWCpostgr-82)
- Deselecting cluster (SUNWCpostgr-82-dev)
- Deselecting cluster (SUNWCsppp)
- Deselecting cluster (SUNWCmoz)
- Deselecting cluster (SUNWCmozdeveloper)
- Deselecting cluster (SUNWCbrowser)
- Deselecting cluster (SUNWCbrowserdev)
- Deselecting cluster (SUNWCgna11y)
- Deselecting cluster (SUNWCgna11ydev)
- Deselecting cluster (SUNWCgnapps)
- Deselecting cluster (SUNWCgndev)
- Deselecting cluster (SUNWCgnex)
WARNING: Unknown cluster ignored (SUNWClx)
- Deselecting cluster (SUNWCxscreensaver)
WARNING: Deselected cluster is already deselected (SUNWCpm)
- Deselecting cluster (SUNWCthai)
- Deselecting cluster (SUNWCGtk)
- Deselecting cluster (SUNWCzebra)
- Deselecting cluster (SUNWCevo)
- Deselecting cluster (SUNWCevodev)
- Deselecting cluster (SUNWCsip)
- Deselecting cluster (SUNWCmco)
- Deselecting cluster (SUNWCwbem)
- Deselecting cluster (SUNWCsmc)
- Deselecting package (SUNWimagick)
- Deselecting package (SUNWpmowu)
- Deselecting package (SUNWgnome-search-tool)
- Selecting locale (en_AU.ISO8859-1)
WARNING: SUNWgnome-libs depends on SUNWgnome-a11y-base-libs, which is not selected
WARNING: SUNWusb depends on SUNWaudd, which is not selected
WARNING: SUNWwbdev depends on SUNWwbapi, which is not selected
WARNING: SUNWwbpro depends on SUNWwbapi, which is not selected
WARNING: SUNWmga depends on SUNWwbmc, which is not selected
WARNING: SUNWmga depends on SUNWwbcor, which is not selected
WARNING: SUNWmga depends on SUNWwbcou, which is not selected
WARNING: SUNWmga depends on SUNWwbapi, which is not selected
WARNING: SUNWrmui depends on SUNWmgapp, which is not selected
WARNING: SUNWrmui depends on SUNWwbcor, which is not selected
WARNING: SUNWrmui depends on SUNWwbcou, which is not selected
WARNING: SUNWrmui depends on SUNWwbapi, which is not selected
WARNING: SUNWpmowr depends on SUNWpmr, which is not selected
WARNING: SUNWzfsgr depends on SUNWmconr, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcos, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcosx, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcon, which is not selected
WARNING: SUNWa2psu depends on SUNWimagick, which is not selected
WARNING: SUNWdclnt depends on SUNWwbmc, which is not selected
WARNING: SUNWdclnt depends on SUNWwbcor, which is not selected
WARNING: SUNWdclnt depends on SUNWwbcou, which is not selected
WARNING: SUNWdclnt depends on SUNWwbapi, which is not selected
WARNING: SUNWdhcsu depends on SUNWwbcou, which is not selected
WARNING: SUNWacroread-plugin depends on SUNWmozilla, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbcor, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbcou, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbapi, which is not selected
WARNING: SUNWdmgtu depends on SUNWwbcou, which is not selected
WARNING: SUNWdmgtu depends on SUNWwbcor, which is not selected
WARNING: SUNWlvma depends on SUNWmc, which is not selected
WARNING: SUNWlvma depends on SUNWwbcor, which is not selected
WARNING: SUNWlvma depends on SUNWwbcou, which is not selected
WARNING: SUNWlvma depends on SUNWwbapi, which is not selected
WARNING: SUNWlvmg depends on SUNWwbmc, which is not selected
WARNING: SUNWlvmg depends on SUNWmc, which is not selected
WARNING: SUNWlvmg depends on SUNWwbcor, which is not selected
WARNING: SUNWlvmg depends on SUNWwbcou, which is not selected
WARNING: SUNWlvmg depends on SUNWwbapi, which is not selected
WARNING: SUNWasac depends on SUNWjato, which is not selected
WARNING: SUNWasac depends on SUNWmctag, which is not selected
WARNING: SUNWasac depends on SUNWmcon, which is not selected
WARNING: SUNWjre-config depends on SUNWmozilla, which is not selected
WARNING: SUNWmcex depends on SUNWmc, which is not selected
WARNING: SUNWpmgr depends on SUNWwbmc, which is not selected
WARNING: SUNWpmgr depends on SUNWwbapi, which is not selected
WARNING: SUNWrmwbu depends on SUNWmgapp, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbapi, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbcou, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbcor, which is not selected
- Selecting all disks
- Configuring boot device
- Using disk (c0t1d0) for "rootdisk"
- Configuring / (c0t1d0s0)
- Configuring swap (c0t1d0s1)
- Configuring /var (c0t1d0s5)
- Configuring (c0t1d0s7)
- Configuring /data (c0t1d0s4)
- Deselecting unmodified disk (c0t3d0)

Verifying disk configuration
- WARNING: Changing the system's default boot device in the EEPROM

Verifying space allocation
- Total software size: 2697.58 Mbytes

Preparing system for Solaris install

Configuring disk (c0t1d0)
- Creating Solaris disk label (VTOC)

Creating and checking UFS file systems
- Creating / (c0t1d0s0)
- Creating /data (c0t1d0s4)
- Creating /var (c0t1d0s5)

Beginning Solaris software installation

Starting software installation
SUNWocfd.........................done. 2697.23 Mbytes remaining.
SUNWlucfg........................done. 2697.15 Mbytes remaining.
SUNWcsu..........................done. 2682.42 Mbytes remaining.
SUNWcsr..........................done. 2678.23 Mbytes remaining.
SUNWcsl..........................done. 2664.18 Mbytes remaining.
SUNWcnetr........................done. 2664.12 Mbytes remaining.
[...]
SUNWtcsh.........................done. 2.62 Mbytes remaining.
SUNWter..........................done. 1.00 Mbytes remaining.

Completed software installation

Solaris 10 software installation succeeded

Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)

Cleaning devices

Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)

Installing boot information
- Installing boot blocks (c0t1d0s0)
- Installing boot blocks (/dev/rdsk/c0t1d0s0)
- Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting

Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)

Installation complete

WARNING: CHANGE DEFAULT BOOT DEVICE
If you want the system to always reboot Solaris from
the boot device that you've specified (c0t1d0s0),
you must change the system's default boot device using
the eeprom(1M) command after installing Solaris software.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...

Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
Executing finish script "Utils/finish"...

Installation of hostf01 at 18:18 on 02-Jan-2008
Loading JumpStart Server variables
Loading JumpStart Server variables
JumpStart Enterprise Toolkit version 4.4
Loading Client configuration file
Loading Client configuration file
Creating directory: /a/var/opt/sun/jet/post_install
Creating directory: /a/var/opt/sun/jet/post_install
Creating directory: /a/var/opt/sun/jet/Utils
Creating directory: /a/var/opt/sun/jet/Utils
Creating directory: /a/var/opt/sun/jet/config
Creating directory: /a/var/opt/sun/jet/config
Creating directory: /a/var/opt/sun/jet/js_media/patch
Creating directory: /a/var/opt/sun/jet/js_media/patch
Creating directory: /a/var/opt/sun/jet/js_media/pkg
Creating directory: /a/var/opt/sun/jet/js_media/pkg
Copying file Clients/hostf01/sysidcfg to /a/var/opt/sun/jet/config/sysidcfg
Copying file Clients/hostf01/sysidcfg to /a/var/opt/sun/jet/config/sysidcfg
Copying file Clients/hostf01/profile to /a/var/opt/sun/jet/config/profile
Copying file Clients/hostf01/profile to /a/var/opt/sun/jet/config/profile
Copying file Clients/hostf01/host.config to /a/var/opt/sun/jet/config/host.config
Copying file Clients/hostf01/host.config to /a/var/opt/sun/jet/config/host.config
Copying file Utils/solaris/releaseinfo to /a/var/opt/sun/jet/config/releaseinfo
Copying file Utils/solaris/releaseinfo to /a/var/opt/sun/jet/config/releaseinfo
Copying functions to /a/var/opt/sun/jet/Utils/lib
Copying functions to /a/var/opt/sun/jet/Utils/lib
Copying file Clients/hostf01/module_hints to /a/var/opt/sun/jet/config/module_hints
Copying file Clients/hostf01/module_hints to /a/var/opt/sun/jet/config/module_hints
NFS Mounting Media Directories
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /a/var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/patches on /a/var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /a/var/opt/sun/jet/js_media/pkg
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /a/var/opt/sun/jet/js_media/pkg
BASE_CONFIG: Installing base_config....
BASE_CONFIG: Installing base_config....
BASE_CONFIG: Product base_config started
BASE_CONFIG: WARNING -> Recommended Patches not found (nfs://192.168.100.14/data/jumpstart/patches/10_Recommended)
BASE_CONFIG: No HW specific packages for platform SUNW,Netra-T2000
BASE_CONFIG: No HW specific patches for platform SUNW,Netra-T2000
BASE_CONFIG: Set root password
BASE_CONFIG: Setting netmask for primary interface
BASE_CONFIG: Primary interface is e1000g0
BASE_CONFIG: Starting ipmp configuration
BASE_CONFIG: Setting OBP local-mac-address to true
BASE_CONFIG: Adding IPMP group ipmp0 using interfaces e1000g0 e1000g1
BASE_CONFIG: Merge hosts file /tmp/addhost.20254 with /a/etc/inet/hosts
BASE_CONFIG: Add netmask 192.168.105.0 / 255.255.255.224
BASE_CONFIG: Adding IPMP group ipmp1 using interfaces e1000g2 e1000g3
BASE_CONFIG: Merge hosts file /tmp/addhost.20484 with /a/etc/inet/hosts
BASE_CONFIG: Setting loghost to nodename
BASE_CONFIG: Merge hosts file /tmp/addhost.20640 with /a/etc/inet/hosts
BASE_CONFIG: Update nodename to hostf01
BASE_CONFIG: Setting default router to 192.168.174.65
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/z
BASE_CONFIG: Register postinstall script 'enabledns' for boot z
BASE_CONFIG: Configure NTP
BASE_CONFIG: Configuring NOTROUTER
BASE_CONFIG: Disabling power management
BASE_CONFIG: Enabling Remote Root Login (telnet/rsh)
BASE_CONFIG: Enabling Remote Root Login (SSH)
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/n-post
BASE_CONFIG: Register postinstall script 'setupdumpdevice' for boot n
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/n
BASE_CONFIG: Register postinstall script 'run_sshkeygen' for boot n
BASE_CONFIG: Enabling logging on all filesystems
BASE_CONFIG: Setting system terminal type to vt100
BASE_CONFIG: Register postinstall script 'console' for boot n
BASE_CONFIG: Setting NFSv4 domain
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/system.add
BASE_CONFIG: Product base_config finished
JASS: Installing jass....
JASS: Installing jass....
JASS: Unsupported product version for this OS... exiting
CUSTOM: Installing custom....
CUSTOM: Installing custom....
CUSTOM: Installing SMCsudo from: /a/var/opt/sun/jet/js_media/pkg/custom/sparc

Installation of <SMCsudo> was successful.
CUSTOM: SMCsudo installation complete
CUSTOM: Copying file Clients/hostf01/my_custom.tar to /a/var/tmp/my_custom.tar
CUSTOM: Register postinstall script 'install_root_config' for boot n
CUSTOM: Register postinstall script 'install_sysadmin_config' for boot n
CUSTOM: Register postinstall script 'install_sudo_config' for boot n
SDS: Installing sds....
SDS: Installing sds....
SDS: Copying file sds_functions to /a/var/opt/sun/jet/Utils/sds_functions
SDS: Creating directory: /a/var/opt/sun/jet/post_install/Platform/1
SDS: Register postinstall script 'set_boot_device' for boot 1
SDS: Register postinstall script 'create_metadb' for boot 1
SDS: Register postinstall script 'create_user_devices' for boot 1
SDS: Register postinstall script 'attach_user_mirrors' for boot z
SDS: WARNING: unable to locate specified md.tab for SDS.
EXPLO: Installing explo....
EXPLO: Installing explo....
EXPLO: Copying file /a/tmp/explo_def to /a//var/opt/sun/jet/config/explo_def
EXPLO: explorer -g may need to be run on the client after build
EXPLO: Copying file /a/tmp/SUNWexplo to /a/var/opt/sun/jet/responses/SUNWexplo
EXPLO: Copying file /a/tmp/SUNWexplu to /a/var/opt/sun/jet/responses/SUNWexplu
EXPLO: Register postinstall script 'add_packages' for boot 1
EXPLO: Register postinstall script 'update_explorer' for boot n
SAN: Installing san....
SAN: Installing san....
SAN: Register postinstall script 'defaultvtoc' for boot 1
SAN: Register postinstall script 'mpxio_config' for boot 1
ZONES: Installing zones....
ZONES: Installing zones....
ZONES: Install /usr/bin/jetzone script
ZONES: Install /usr/lib/jetzone supplementary files
ZONES: Register postinstall script 'postinstall' for boot z
SBD: Installing sbd....
SBD: Installing sbd....
SBD: configured
----------------------------------------------------------
----------------------------------------------------------
Product modules processed, finish up installation tasks
Product modules processed, finish up installation tasks
Save existing system entries
Save existing system entries
Copying file /a/etc/system to /a/etc/system.prejs
Copying file /a/etc/system to /a/etc/system.prejs
Creating directory: /a/var/opt/sun/jet/system.add/updated
Creating directory: /a/var/opt/sun/jet/system.add/updated
Copying file etc/jumpstart.conf to /a/var/opt/sun/jet/config/jumpstart.conf
Copying file etc/jumpstart.conf to /a/var/opt/sun/jet/config/jumpstart.conf
Copying file Utils/smf/jetjump.xml to /a/var/svc/manifest/site/jetjump.xml
Copying file Utils/smf/jetjump.xml to /a/var/svc/manifest/site/jetjump.xml
Copying file Utils/S99jumpstart to /a/var/opt/sun/jet/post_install/S99jumpstart
Copying file Utils/S99jumpstart to /a/var/opt/sun/jet/post_install/S99jumpstart
NFS Unmounting Media Directories
NFS Unmounting Media Directories
Unmounting /a/var/opt/sun/jet/js_media/pkg
Unmounting /a/var/opt/sun/jet/js_media/pkg
Unmounting /a/var/opt/sun/jet/js_media/patch
Unmounting /a/var/opt/sun/jet/js_media/patch
Make a link to finish log...
Make a link to finish log...

Finish script Utils/finish execution completed.

The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.

The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.

Solaris installation program completed.
# '''init 6'''
#
The system is being restarted.
syncing file systems... done
rebooting...

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set

SC Alert: Host system has shut down.

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef Host ID: 84aabeef.

Boot device: rootdisk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-T2000/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Hostname: hostf01
Configuring devices.
Loading smf(5) service descriptions: 155/155
/dev/rdsk/c0t1d0s4 is clean
Creating new rsa public/private host key pair
JumpStart (/var/opt/sun/jet/post_install/S99jumpstart) started @ Wednesday, 9 January 2008 5:07:08 PM GMT
Loading JumpStart Server variables
Loading Client configuration file
Running additional install files for reboot Platform/1
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /var/opt/sun/jet/js_media/pkg
EXPLO: Running 001.explo.001.add_packages
Creating new dsa public/private host key pair
EXPLO: Installing SUNWexplo from: /var/opt/sun/jet/js_media/pkg/explo/5.10/sparc
EXPLO: TTY fix being applied
EXPLO: TTY fix being removed
EXPLO: SUNWexplo installation complete
EXPLO: Installing SUNWexplu from: /var/opt/sun/jet/js_media/pkg/explo/5.10/sparc
EXPLO: TTY fix being applied
EXPLO: TTY fix being removed
EXPLO: SUNWexplu installation complete
SDS: Running 001.sds.001.set_boot_device
SDS: Setting OBP nvramrc rootdisk path
SDS: Setting OBP boot-device=rootdisk net
SDS: Running 001.sds.002.create_metadb
SDS: Create 3 copies on c0t1d0s7
SDS: Running 001.sds.007.create_user_devices
SAN: Running 002.san.001.defaultvtoc
SAN: Running 002.san.002.mpxio_config
SAN: MPxIO - Saving /kernel/drv/fp.conf to /kernel/drv/fp.conf.orig
SAN: MPxIO - Saving /kernel/drv/scsi_vhci.conf to /kernel/drv/scsi_vhci.conf.orig
SAN: MPxIO - Global configuration is Disabled
SAN: MPxIO - Load balancing algorithum configured as round-robin
NFS Unmounting Media Directories
Unmounting /var/opt/sun/jet/js_media/pkg
Unmounting /var/opt/sun/jet/js_media/patch
Save existing system entries
Copying file /etc/system to /etc/system.prejs2
Jan 9 17:07:42 hostf01 reboot: rebooted by root
Jan 9 17:07:43 hostf01 syslogd: going down on signal 15
Jan 9 17:07:43 rpc.metad: Terminated
syncing file systems... done
rebooting...

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set

SC Alert: Host system has shut down.

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef, Host ID: 84aabeef.

Boot device: rootdisk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-T2000/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Hostname: hostf01
/dev/rdsk/c0t1d0s4 is clean
JumpStart (/var/opt/sun/jet/post_install/S99jumpstart) started @ Wednesday, 9 January 2008 5:09:47 PM GMT
Loading JumpStart Server variables
Loading Client configuration file
No more reboots required
Running additional install files for reboot n
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /var/opt/sun/jet/js_media/pkg
BASE_CONFIG: Running 001.base_config.001.run_sshkeygen
BASE_CONFIG: Generating ssh keys...
BASE_CONFIG: Running 001.base_config.002.console
BASE_CONFIG: Setting terminal type to vt100
CUSTOM: Running 002.custom.001.install_root_config
CUSTOM: Running 002.custom.002.install_sysadmin_config
CUSTOM: Running 002.custom.003.install_sudo_config
EXPLO: Running 003.explo.001.update_explorer
EXPLO: Copying file //var/opt/sun/jet/config/explorer.info to /etc//opt/SUNWexplo/default/explorer
BASE_CONFIG: Running 001.base_config.001.setupdumpdevice
BASE_CONFIG: Setting dump device to /dev/dsk/c0t1d0s1
BASE_CONFIG: Setting dumpadm minfree to 20000k
BASE_CONFIG: Reset savecore directory
NFS Unmounting Media Directories
Unmounting /var/opt/sun/jet/js_media/pkg
Unmounting /var/opt/sun/jet/js_media/patch
Running additional install files for reboot z
BASE_CONFIG: Running 001.base_config.001.enabledns
BASE_CONFIG: Set DNS domain to test.example.com
BASE_CONFIG: Add DNS server 192.168.100.14
BASE_CONFIG: Add DNS searchpath test.example.com example.com
SDS: Running 002.sds.001.attach_user_mirrors
ZONES: Running 003.zones.001.postinstall
ZONES: Setting up zone hostf01-zone1
ZONES: Setting up zone hostf01-zone2
ZONES: Setting up zone hostf01-zone3
ZONES: Setting up zone hostf01-zone4
ZONES: Running /var/tmp/no_zone_sysidcfg
Disable & delete SMF tag svc:/site/jetjump
JumpStart is complete @ Wednesday, 9 January 2008 6:30:37 PM GMT

hostf01 console login: svc.startd: The system is coming down. Please wait.
svc.startd: 72 system services are now being stopped.
svc.startd: The system is down.
syncing file systems... done
rebooting...

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set

SC Alert: Host system has shut down.

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef, Host ID: 84aabeef.

Boot device: rootdisk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-T2000/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Hostname: hostf01
/dev/rdsk/c0t1d0s4 is clean

hostf01 console login:

Public JET no zone sysidcfg

2008-01-10T06:55:40Z

Jetmark: Public JET no zone sysidcfg moved to JET no zone sysidcfg

#redirect [[JET no zone sysidcfg]]

JET no zone sysidcfg

2008-01-10T06:55:40Z

Jetmark: Public JET no zone sysidcfg moved to JET no zone sysidcfg

[[Jet_Installation_Recipe|Parent]]

==no_zone_sysidcfg==

#!/usr/bin/perl
#
# Program : no_zone_sysidcfg
# Author : Mark Ashley 
# Version : 1.2
# Initial Date : 8th January 2008
# Modify Date : 9th January 2008
# Purpose : Do all the post zone install steps needed to avoid the sysidcfg firing up
# This allows the zones to fully install by themselves. Why doesn't JET do this?

opendir(ZONES, "/data/zone");
my @zones = grep(!/^\./, readdir(ZONES));
closedir(ZONES);

foreach my $zone (@zones) {
&setup_tz($zone);
&setup_dns($zone);
&setup_nfs($zone);
&setup_nodename($zone);
&setup_power_mgmt($zone);
&setup_sysid_state($zone);
}

exit(0);

##############################################################################################

sub setup_tz {
my ($zone) = @_;
&mod_file_value("/data/zone/${zone}/root/etc/TIMEZONE", "TZ", "Australia/NSW");
}

sub setup_dns {
my ($zone) = @_;
my $file = "/data/zone/${zone}/root/etc/resolv.conf";
open(RESOLV, ">${file}");
print RESOLV "domain test.example.com\n";
print RESOLV "nameserver 192.168.100.14\n";
print RESOLV "search test.example.com example.com\n";
close(RESOLV);
chmod 0644, $file;
&cp("/data/zone/${zone}/root/etc/nsswitch.dns", "/data/zone/${zone}/root/etc/nsswitch.conf");
}

sub setup_nfs {
my ($zone) = @_;
&mod_file_value("/data/zone/${zone}/root/etc/default/nfs", "NFSMAPIP_DOMAIN", "test.example.com");
open(DONE, ">/data/zone/${zone}/root/etc/.NFS4inst_state.domain");
close(DONE);
}

sub setup_power_mgmt {
my ($zone) = @_;
open(DONT, ">/data/zone/${zone}/root/noautoshutdown");
close(DONT);
}

sub setup_nodename {
my ($zone) = @_;
my $file = "/data/zone/${zone}/root/etc/nodename";
open(NODENAME, ">${file}");
print NODENAME "${zone}\n";
close(NODENAME);
chmod 0644, $file;
}

sub setup_sysid_state {
my ($zone) = @_;
my $file = "/data/zone/${zone}/root/etc/.sysIDtool.state";
open(SYSID, ">${file}");
print SYSID "1 # System previously configured?\n";
print SYSID "0 # Bootparams succeeded?\n";
print SYSID "1 # System is on a network?\n";
print SYSID "0 # Extended network information gathered?\n";
print SYSID "1 # Autobinder succeeded?\n";
print SYSID "1 # Network has subnets?\n";
print SYSID "1 # root password prompted for?\n";
print SYSID "1 # locale and term prompted for?\n";
print SYSID "1 # security policy in place\n";
print SYSID "1 # NFSv4 domain configured\n";
print SYSID "xterms\n";
close(SYSID);
chmod 0644, $file;
unlink("/data/zone/${zone}/root/etc/.UNCONFIGURED");
}

sub mod_file_value {
my ($file, $var, $setting) = @_;
if (! -f $file) { return; }
if ($debug) { print STDOUT "Editing ${file}\n"; }
my $found = 0;
open(CONF, $file);
open(CONFNEW, ">${file}.temp");
while (<CONF>) {
if ($debug) { print STDOUT "conf: $_"; }
if (/^${var}=/) { # Found our setting, fix it.
print CONFNEW "${var}=${setting}\n";
if ($debug) { print STDOUT "conf_fix: ${var}=${setting}\n"; }
$found++;
} else {
print CONFNEW $_;
}
}
close(CONF);
close(CONFNEW);
rename("${file}.temp", $file);
chmod 0644, $file;
return($found);
}

sub cp {
my($infile, $outfile) = @_;
if (!-f $infile) {
print STDOUT "Error: $infile does not exist!\n";
exit(1);
}
open(CPIN, $infile) || die "Error during copy: opening $infile: $!";
open(CPOUT, ">$outfile") || die "Error during copy: opening $outfile: $!";
while(<CPIN>) { print CPOUT $_; }
close(CPIN);
close(CPOUT);
chmod 0644, $outfile;
}

2008-01-10T04:21:01Z

Jetmark:

JET host hostf01

2008-01-10T04:19:22Z

Jetmark:

[[Public_JET_Installation|Parent]]

==hostf01 JET Configuration==

Add all the IPs for the host to /etc/hosts on the jumpstart server.

192.168.174.68 hostf01-g0
192.168.174.69 hostf01-g1
192.168.174.70 hostf01
192.168.174.71 hostf01-zone1
192.168.174.122 hostf01-zone2
192.168.174.123 hostf01-zone3
192.168.174.124 hostf01-zone4
192.168.105.3 hostf01-g2
192.168.105.4 hostf01-g3
192.168.105.5 hostf01-stor

Add the IPs for the host to /data/dns/db.192.168.174 and /data/dns/db.test.example.com on your DNS server. (Pathnames may vary of course).

/data/dns/db.192.168.105
db.192.168.105:3 PTR hostf01-g2.test.example.com.
db.192.168.105:4 PTR hostf01-g3.test.example.com.
db.192.168.105:5 PTR hostf01-stor.test.example.com.

/data/dns/db.192.168.174
68 PTR hostf01-g0.test.example.com.
69 PTR hostf01-g1.test.example.com.
70 PTR hostf01.test.example.com.
71 PTR hostf01-zone1.test.example.com.
122 PTR hostf01-zone2.test.example.com.
123 PTR hostf01-zone3.test.example.com.
124 PTR hostf01-zone4.test.example.com.

/data/dns/db.test.example.com
hostf01-g0 IN A 192.168.174.68
hostf01-g1 IN A 192.168.174.69
hostf01 IN A 192.168.174.70
hostf01-zone1 IN A 192.168.174.71
hostf01-zone2 IN A 192.168.174.122
hostf01-zone3 IN A 192.168.174.123
hostf01-zone4 IN A 192.168.174.124
hostf01-g2 IN A 192.168.105.3
hostf01-g3 IN A 192.168.105.4
hostf01-stor IN A 192.168.105.5

dnshost:/ root# rndc reload

Tune the jumpstart_config.pl script for the host specific details. This script should always be run before any make_client command is executed.

jumphost:/ root# vi /var/tmp/jumpstart_config.pl
&setup_host_conf("hostf01", "base_config_sysidcfg_default_route", '"192.168.174.65"');
&setup_host_conf("hostf01", "base_config_nodename", '"hostf01"');
&setup_host_conf("hostf01", "base_config_defaultrouter", '"192.168.174.65"');
&setup_host_conf("hostf01", "zones_names", '"hostf01-zone1 hostf01-zone2 hostf01-zone3 hostf01-zone4"');
&setup_host_conf("hostf01", "base_config_ipmp_networkifs", '"e1000g0_e1000g1 e1000g2_e1000g3"');
&setup_host_conf("hostf01", "base_config_ipmp_networkif_e1000g0_e1000g1", '"ipmp0 s 192.168.174.68 192.168.174.69 26 hostf01 192.168.174.70"');
&setup_host_conf("hostf01", "base_config_ipmp_networkif_e1000g2_e1000g3", '"ipmp1 s 192.168.105.3 192.168.105.4 27 hostf01-stor 192.168.105.5"');
&setup_host_conf("hostf01-zone1", "custom_packages", '""');
&setup_host_conf("hostf01-zone1", "base_config_nodename", '"hostf01-zone1"');
&setup_host_conf("hostf01-zone2", "custom_packages", '""');
&setup_host_conf("hostf01-zone2", "base_config_nodename", '"hostf01-zone2"');
&setup_host_conf("hostf01-zone3", "custom_packages", '""');
&setup_host_conf("hostf01-zone3", "base_config_nodename", '"hostf01-zone3"');
&setup_host_conf("hostf01-zone4", "custom_packages", '""');
&setup_host_conf("hostf01-zone4", "base_config_nodename", '"hostf01-zone4"');

Create the templates for the zones and host

/var/tmp/jumpstart_config.pl
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone1 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone2 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone3 base_config custom sbd explo
make_zone_template -A sun4v -O OS10_SPARC_807 -f hostf01-zone4 base_config custom sbd explo
make_template -f -A sun4v -O OS10_SPARC_807 -E 00:14:4F:AA:BE:EF hostf01 base_config custom sds explo san jass zones sbd
/var/tmp/jumpstart_config.pl
make_client -f -N hostf01-zone1
make_client -f -N hostf01-zone2
make_client -f -N hostf01-zone3
make_client -f -N hostf01-zone4
make_client -f -N hostf01

Install custom files and scripts to adjust the host after installation

<DL><DD>[[Public_JET_install_root_config|install_root_config]]</DD><DL>
<DL><DD>[[Public_JET_install_sysadmin_config|install_sysadmin_config]]</DD><DL>
<DL><DD>[[Public_JET_install_sudo_config|install_sudo_config]]</DD><DL>
<DL><DD>[[Public_JET_no_zone_sysidcfg|no_zone_sysidcfg]]</DD><DL>
<DL><DD>[[Public_JET_my_custom.tar|my_custom.tar]]</DD><DL>

cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone1
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone2
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone3
cp /var/tmp/my_custom/install_root_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/install_sysadmin_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/install_sudo_config /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom/no_zone_sysidcfg /opt/SUNWjet/Clients/hostf01-zone4
cp /var/tmp/my_custom.tar /opt/SUNWjet/Clients/hostf01-zone4

Check the hosts built OK

check_client hostf01-zone1
check_client hostf01-zone2
check_client hostf01-zone3
check_client hostf01-zone4
check_client hostf01

At the OBP prompt network boot the machine, skipping the windowing system. Note: You will need to 'init 6' it once during the boot process (for unknown reasons) when it pauses at the root prompt.

ok# boot net:dhcp - install nowin

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef, Host ID: 84aabeef.

Boot device: /pci@780/pci@0/pci@1/network@0:dhcp File and args: - install nowin
1000 Mbps full duplex Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps full duplex Link up
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Configuring devices.
Using DHCP for network configuration information.
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
NFS compound failed for server 192.168.100.14: error 5 (RPC: Timed out)
Setting up Java. Please wait...
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file /sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
Starting remote procedure call (RPC) services: done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 192.168.100.14:/opt/SUNWjet.
Checking rules.ok file...
Using begin script: Utils/begin
Using derived profile: Utils/begin
Using finish script: Utils/finish
Executing JumpStart preinstall phase...
Executing begin script "Utils/begin"...
Installation of hostf01 at 17:48 on 02-Jan-2008
Loading JumpStart Server variables
Loading JumpStart Server variables
Loading Client configuration file
Loading Client configuration file
BASE_CONFIG: Running base_config begin script....
BASE_CONFIG: Running base_config begin script....
CUSTOM: Running custom begin script....
CUSTOM: Running custom begin script....
Begin script Utils/begin execution completed.
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.

Processing default locales
- Specifying default locale (en_AU.ISO8859-1)

Processing profile
- Selecting cluster (SUNWCall)
- Deselecting cluster (SUNWCpm)
WARNING: Unknown cluster ignored (SUNWCpmx)
- Deselecting cluster (SUNWCdial)
WARNING: Unknown cluster ignored (SUNWCdialx)
- Deselecting cluster (SUNWCaudd)
- Deselecting cluster (SUNWCstaroffice)
- Deselecting cluster (SUNWCpostgr)
- Deselecting cluster (SUNWCpostgr-dev)
- Deselecting cluster (SUNWCpostgr-82)
- Deselecting cluster (SUNWCpostgr-82-dev)
- Deselecting cluster (SUNWCsppp)
- Deselecting cluster (SUNWCmoz)
- Deselecting cluster (SUNWCmozdeveloper)
- Deselecting cluster (SUNWCbrowser)
- Deselecting cluster (SUNWCbrowserdev)
- Deselecting cluster (SUNWCgna11y)
- Deselecting cluster (SUNWCgna11ydev)
- Deselecting cluster (SUNWCgnapps)
- Deselecting cluster (SUNWCgndev)
- Deselecting cluster (SUNWCgnex)
WARNING: Unknown cluster ignored (SUNWClx)
- Deselecting cluster (SUNWCxscreensaver)
WARNING: Deselected cluster is already deselected (SUNWCpm)
- Deselecting cluster (SUNWCthai)
- Deselecting cluster (SUNWCGtk)
- Deselecting cluster (SUNWCzebra)
- Deselecting cluster (SUNWCevo)
- Deselecting cluster (SUNWCevodev)
- Deselecting cluster (SUNWCsip)
- Deselecting cluster (SUNWCmco)
- Deselecting cluster (SUNWCwbem)
- Deselecting cluster (SUNWCsmc)
- Deselecting package (SUNWimagick)
- Deselecting package (SUNWpmowu)
- Deselecting package (SUNWgnome-search-tool)
- Selecting locale (en_AU.ISO8859-1)
WARNING: SUNWgnome-libs depends on SUNWgnome-a11y-base-libs, which is not selected
WARNING: SUNWusb depends on SUNWaudd, which is not selected
WARNING: SUNWwbdev depends on SUNWwbapi, which is not selected
WARNING: SUNWwbpro depends on SUNWwbapi, which is not selected
WARNING: SUNWmga depends on SUNWwbmc, which is not selected
WARNING: SUNWmga depends on SUNWwbcor, which is not selected
WARNING: SUNWmga depends on SUNWwbcou, which is not selected
WARNING: SUNWmga depends on SUNWwbapi, which is not selected
WARNING: SUNWrmui depends on SUNWmgapp, which is not selected
WARNING: SUNWrmui depends on SUNWwbcor, which is not selected
WARNING: SUNWrmui depends on SUNWwbcou, which is not selected
WARNING: SUNWrmui depends on SUNWwbapi, which is not selected
WARNING: SUNWpmowr depends on SUNWpmr, which is not selected
WARNING: SUNWzfsgr depends on SUNWmconr, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcos, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcosx, which is not selected
WARNING: SUNWzfsgu depends on SUNWmcon, which is not selected
WARNING: SUNWa2psu depends on SUNWimagick, which is not selected
WARNING: SUNWdclnt depends on SUNWwbmc, which is not selected
WARNING: SUNWdclnt depends on SUNWwbcor, which is not selected
WARNING: SUNWdclnt depends on SUNWwbcou, which is not selected
WARNING: SUNWdclnt depends on SUNWwbapi, which is not selected
WARNING: SUNWdhcsu depends on SUNWwbcou, which is not selected
WARNING: SUNWacroread-plugin depends on SUNWmozilla, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbcor, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbcou, which is not selected
WARNING: SUNWfsmgtu depends on SUNWwbapi, which is not selected
WARNING: SUNWdmgtu depends on SUNWwbcou, which is not selected
WARNING: SUNWdmgtu depends on SUNWwbcor, which is not selected
WARNING: SUNWlvma depends on SUNWmc, which is not selected
WARNING: SUNWlvma depends on SUNWwbcor, which is not selected
WARNING: SUNWlvma depends on SUNWwbcou, which is not selected
WARNING: SUNWlvma depends on SUNWwbapi, which is not selected
WARNING: SUNWlvmg depends on SUNWwbmc, which is not selected
WARNING: SUNWlvmg depends on SUNWmc, which is not selected
WARNING: SUNWlvmg depends on SUNWwbcor, which is not selected
WARNING: SUNWlvmg depends on SUNWwbcou, which is not selected
WARNING: SUNWlvmg depends on SUNWwbapi, which is not selected
WARNING: SUNWasac depends on SUNWjato, which is not selected
WARNING: SUNWasac depends on SUNWmctag, which is not selected
WARNING: SUNWasac depends on SUNWmcon, which is not selected
WARNING: SUNWjre-config depends on SUNWmozilla, which is not selected
WARNING: SUNWmcex depends on SUNWmc, which is not selected
WARNING: SUNWpmgr depends on SUNWwbmc, which is not selected
WARNING: SUNWpmgr depends on SUNWwbapi, which is not selected
WARNING: SUNWrmwbu depends on SUNWmgapp, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbapi, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbcou, which is not selected
WARNING: SUNWrmwbu depends on SUNWwbcor, which is not selected
- Selecting all disks
- Configuring boot device
- Using disk (c0t1d0) for "rootdisk"
- Configuring / (c0t1d0s0)
- Configuring swap (c0t1d0s1)
- Configuring /var (c0t1d0s5)
- Configuring (c0t1d0s7)
- Configuring /data (c0t1d0s4)
- Deselecting unmodified disk (c0t3d0)

Verifying disk configuration
- WARNING: Changing the system's default boot device in the EEPROM

Verifying space allocation
- Total software size: 2697.58 Mbytes

Preparing system for Solaris install

Configuring disk (c0t1d0)
- Creating Solaris disk label (VTOC)

Creating and checking UFS file systems
- Creating / (c0t1d0s0)
- Creating /data (c0t1d0s4)
- Creating /var (c0t1d0s5)

Beginning Solaris software installation

Starting software installation
SUNWocfd.........................done. 2697.23 Mbytes remaining.
SUNWlucfg........................done. 2697.15 Mbytes remaining.
SUNWcsu..........................done. 2682.42 Mbytes remaining.
SUNWcsr..........................done. 2678.23 Mbytes remaining.
SUNWcsl..........................done. 2664.18 Mbytes remaining.
SUNWcnetr........................done. 2664.12 Mbytes remaining.
[...]
SUNWtcsh.........................done. 2.62 Mbytes remaining.
SUNWter..........................done. 1.00 Mbytes remaining.

Completed software installation

Solaris 10 software installation succeeded

Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)

Cleaning devices

Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)

Installing boot information
- Installing boot blocks (c0t1d0s0)
- Installing boot blocks (/dev/rdsk/c0t1d0s0)
- Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting

Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)

Installation complete

WARNING: CHANGE DEFAULT BOOT DEVICE
If you want the system to always reboot Solaris from
the boot device that you've specified (c0t1d0s0),
you must change the system's default boot device using
the eeprom(1M) command after installing Solaris software.
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...

Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
Executing finish script "Utils/finish"...

Installation of hostf01 at 18:18 on 02-Jan-2008
Loading JumpStart Server variables
Loading JumpStart Server variables
JumpStart Enterprise Toolkit version 4.4
Loading Client configuration file
Loading Client configuration file
Creating directory: /a/var/opt/sun/jet/post_install
Creating directory: /a/var/opt/sun/jet/post_install
Creating directory: /a/var/opt/sun/jet/Utils
Creating directory: /a/var/opt/sun/jet/Utils
Creating directory: /a/var/opt/sun/jet/config
Creating directory: /a/var/opt/sun/jet/config
Creating directory: /a/var/opt/sun/jet/js_media/patch
Creating directory: /a/var/opt/sun/jet/js_media/patch
Creating directory: /a/var/opt/sun/jet/js_media/pkg
Creating directory: /a/var/opt/sun/jet/js_media/pkg
Copying file Clients/hostf01/sysidcfg to /a/var/opt/sun/jet/config/sysidcfg
Copying file Clients/hostf01/sysidcfg to /a/var/opt/sun/jet/config/sysidcfg
Copying file Clients/hostf01/profile to /a/var/opt/sun/jet/config/profile
Copying file Clients/hostf01/profile to /a/var/opt/sun/jet/config/profile
Copying file Clients/hostf01/host.config to /a/var/opt/sun/jet/config/host.config
Copying file Clients/hostf01/host.config to /a/var/opt/sun/jet/config/host.config
Copying file Utils/solaris/releaseinfo to /a/var/opt/sun/jet/config/releaseinfo
Copying file Utils/solaris/releaseinfo to /a/var/opt/sun/jet/config/releaseinfo
Copying functions to /a/var/opt/sun/jet/Utils/lib
Copying functions to /a/var/opt/sun/jet/Utils/lib
Copying file Clients/hostf01/module_hints to /a/var/opt/sun/jet/config/module_hints
Copying file Clients/hostf01/module_hints to /a/var/opt/sun/jet/config/module_hints
NFS Mounting Media Directories
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /a/var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/patches on /a/var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /a/var/opt/sun/jet/js_media/pkg
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /a/var/opt/sun/jet/js_media/pkg
BASE_CONFIG: Installing base_config....
BASE_CONFIG: Installing base_config....
BASE_CONFIG: Product base_config started
BASE_CONFIG: WARNING -> Recommended Patches not found (nfs://192.168.100.14/data/jumpstart/patches/10_Recommended)
BASE_CONFIG: No HW specific packages for platform SUNW,Netra-T2000
BASE_CONFIG: No HW specific patches for platform SUNW,Netra-T2000
BASE_CONFIG: Set root password
BASE_CONFIG: Setting netmask for primary interface
BASE_CONFIG: Primary interface is e1000g0
BASE_CONFIG: Starting ipmp configuration
BASE_CONFIG: Setting OBP local-mac-address to true
BASE_CONFIG: Adding IPMP group ipmp0 using interfaces e1000g0 e1000g1
BASE_CONFIG: Merge hosts file /tmp/addhost.20254 with /a/etc/inet/hosts
BASE_CONFIG: Add netmask 192.168.105.0 / 255.255.255.224
BASE_CONFIG: Adding IPMP group ipmp1 using interfaces e1000g2 e1000g3
BASE_CONFIG: Merge hosts file /tmp/addhost.20484 with /a/etc/inet/hosts
BASE_CONFIG: Setting loghost to nodename
BASE_CONFIG: Merge hosts file /tmp/addhost.20640 with /a/etc/inet/hosts
BASE_CONFIG: Update nodename to hostf01
BASE_CONFIG: Setting default router to 192.168.174.65
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/z
BASE_CONFIG: Register postinstall script 'enabledns' for boot z
BASE_CONFIG: Configure NTP
BASE_CONFIG: Configuring NOTROUTER
BASE_CONFIG: Disabling power management
BASE_CONFIG: Enabling Remote Root Login (telnet/rsh)
BASE_CONFIG: Enabling Remote Root Login (SSH)
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/n-post
BASE_CONFIG: Register postinstall script 'setupdumpdevice' for boot n
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/post_install/n
BASE_CONFIG: Register postinstall script 'run_sshkeygen' for boot n
BASE_CONFIG: Enabling logging on all filesystems
BASE_CONFIG: Setting system terminal type to vt100
BASE_CONFIG: Register postinstall script 'console' for boot n
BASE_CONFIG: Setting NFSv4 domain
BASE_CONFIG: Creating directory: /a/var/opt/sun/jet/system.add
BASE_CONFIG: Product base_config finished
JASS: Installing jass....
JASS: Installing jass....
JASS: Unsupported product version for this OS... exiting
CUSTOM: Installing custom....
CUSTOM: Installing custom....
CUSTOM: Installing SMCsudo from: /a/var/opt/sun/jet/js_media/pkg/custom/sparc

Installation of <SMCsudo> was successful.
CUSTOM: SMCsudo installation complete
CUSTOM: Copying file Clients/hostf01/my_custom.tar to /a/var/tmp/my_custom.tar
CUSTOM: Register postinstall script 'install_root_config' for boot n
CUSTOM: Register postinstall script 'install_sysadmin_config' for boot n
CUSTOM: Register postinstall script 'install_sudo_config' for boot n
SDS: Installing sds....
SDS: Installing sds....
SDS: Copying file sds_functions to /a/var/opt/sun/jet/Utils/sds_functions
SDS: Creating directory: /a/var/opt/sun/jet/post_install/Platform/1
SDS: Register postinstall script 'set_boot_device' for boot 1
SDS: Register postinstall script 'create_metadb' for boot 1
SDS: Register postinstall script 'create_user_devices' for boot 1
SDS: Register postinstall script 'attach_user_mirrors' for boot z
SDS: WARNING: unable to locate specified md.tab for SDS.
EXPLO: Installing explo....
EXPLO: Installing explo....
EXPLO: Copying file /a/tmp/explo_def to /a//var/opt/sun/jet/config/explo_def
EXPLO: explorer -g may need to be run on the client after build
EXPLO: Copying file /a/tmp/SUNWexplo to /a/var/opt/sun/jet/responses/SUNWexplo
EXPLO: Copying file /a/tmp/SUNWexplu to /a/var/opt/sun/jet/responses/SUNWexplu
EXPLO: Register postinstall script 'add_packages' for boot 1
EXPLO: Register postinstall script 'update_explorer' for boot n
SAN: Installing san....
SAN: Installing san....
SAN: Register postinstall script 'defaultvtoc' for boot 1
SAN: Register postinstall script 'mpxio_config' for boot 1
ZONES: Installing zones....
ZONES: Installing zones....
ZONES: Install /usr/bin/jetzone script
ZONES: Install /usr/lib/jetzone supplementary files
ZONES: Register postinstall script 'postinstall' for boot z
SBD: Installing sbd....
SBD: Installing sbd....
SBD: configured
----------------------------------------------------------
----------------------------------------------------------
Product modules processed, finish up installation tasks
Product modules processed, finish up installation tasks
Save existing system entries
Save existing system entries
Copying file /a/etc/system to /a/etc/system.prejs
Copying file /a/etc/system to /a/etc/system.prejs
Creating directory: /a/var/opt/sun/jet/system.add/updated
Creating directory: /a/var/opt/sun/jet/system.add/updated
Copying file etc/jumpstart.conf to /a/var/opt/sun/jet/config/jumpstart.conf
Copying file etc/jumpstart.conf to /a/var/opt/sun/jet/config/jumpstart.conf
Copying file Utils/smf/jetjump.xml to /a/var/svc/manifest/site/jetjump.xml
Copying file Utils/smf/jetjump.xml to /a/var/svc/manifest/site/jetjump.xml
Copying file Utils/S99jumpstart to /a/var/opt/sun/jet/post_install/S99jumpstart
Copying file Utils/S99jumpstart to /a/var/opt/sun/jet/post_install/S99jumpstart
NFS Unmounting Media Directories
NFS Unmounting Media Directories
Unmounting /a/var/opt/sun/jet/js_media/pkg
Unmounting /a/var/opt/sun/jet/js_media/pkg
Unmounting /a/var/opt/sun/jet/js_media/patch
Unmounting /a/var/opt/sun/jet/js_media/patch
Make a link to finish log...
Make a link to finish log...

Finish script Utils/finish execution completed.

The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.

The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.

Solaris installation program completed.
# '''init 6'''
#
The system is being restarted.
syncing file systems... done
rebooting...

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set

SC Alert: Host system has shut down.

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef Host ID: 84aabeef.

Boot device: rootdisk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-T2000/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Hostname: hostf01
Configuring devices.
Loading smf(5) service descriptions: 155/155
/dev/rdsk/c0t1d0s4 is clean
Creating new rsa public/private host key pair
JumpStart (/var/opt/sun/jet/post_install/S99jumpstart) started @ Wednesday, 9 January 2008 5:07:08 PM GMT
Loading JumpStart Server variables
Loading Client configuration file
Running additional install files for reboot Platform/1
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /var/opt/sun/jet/js_media/pkg
EXPLO: Running 001.explo.001.add_packages
Creating new dsa public/private host key pair
EXPLO: Installing SUNWexplo from: /var/opt/sun/jet/js_media/pkg/explo/5.10/sparc
EXPLO: TTY fix being applied
EXPLO: TTY fix being removed
EXPLO: SUNWexplo installation complete
EXPLO: Installing SUNWexplu from: /var/opt/sun/jet/js_media/pkg/explo/5.10/sparc
EXPLO: TTY fix being applied
EXPLO: TTY fix being removed
EXPLO: SUNWexplu installation complete
SDS: Running 001.sds.001.set_boot_device
SDS: Setting OBP nvramrc rootdisk path
SDS: Setting OBP boot-device=rootdisk net
SDS: Running 001.sds.002.create_metadb
SDS: Create 3 copies on c0t1d0s7
SDS: Running 001.sds.007.create_user_devices
SAN: Running 002.san.001.defaultvtoc
SAN: Running 002.san.002.mpxio_config
SAN: MPxIO - Saving /kernel/drv/fp.conf to /kernel/drv/fp.conf.orig
SAN: MPxIO - Saving /kernel/drv/scsi_vhci.conf to /kernel/drv/scsi_vhci.conf.orig
SAN: MPxIO - Global configuration is Disabled
SAN: MPxIO - Load balancing algorithum configured as round-robin
NFS Unmounting Media Directories
Unmounting /var/opt/sun/jet/js_media/pkg
Unmounting /var/opt/sun/jet/js_media/patch
Save existing system entries
Copying file /etc/system to /etc/system.prejs2
Jan 9 17:07:42 hostf01 reboot: rebooted by root
Jan 9 17:07:43 hostf01 syslogd: going down on signal 15
Jan 9 17:07:43 rpc.metad: Terminated
syncing file systems... done
rebooting...

SC Alert: Host System has Reset

SC Alert: CRITICAL ALARM is set

SC Alert: Host system has shut down.

Netra T2000, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.4, 32640 MB memory available, Serial #77441264.
Ethernet address 0:14:4f:aa:be:ef, Host ID: 84aabeef.

Boot device: rootdisk File and args:
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Netra-T2000/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
os-io Hostname: hostf01
/dev/rdsk/c0t1d0s4 is clean
JumpStart (/var/opt/sun/jet/post_install/S99jumpstart) started @ Wednesday, 9 January 2008 5:09:47 PM GMT
Loading JumpStart Server variables
Loading Client configuration file
No more reboots required
Running additional install files for reboot n
NFS Mounting Media Directories
Mounting nfs://192.168.100.14/data/jumpstart/patches on /var/opt/sun/jet/js_media/patch
Mounting nfs://192.168.100.14/data/jumpstart/pkgs on /var/opt/sun/jet/js_media/pkg
BASE_CONFIG: Running 001.base_config.001.run_sshkeygen
BASE_CONFIG: Generating ssh keys...
BASE_CONFIG: Running 001.base_config.002.console
BASE_CONFIG: Setting terminal type to vt100
CUSTOM: Running 002.custom.001.install_root_config
CUSTOM: Running 002.custom.002.install_sysadmin_config
CUSTOM: Running 002.custom.003.install_sudo_config
EXPLO: Running 003.explo.001.update_explorer
EXPLO: Copying file //var/opt/sun/jet/config/explorer.info to /etc//opt/SUNWexplo/default/explorer
BASE_CONFIG: Running 001.base_config.001.setupdumpdevice
BASE_CONFIG: Setting dump device to /dev/dsk/c0t1d0s1
BASE_CONFIG: Setting dumpadm minfree to 20000k
BASE_CONFIG: Reset savecore directory
NFS Unmounting Media Directories
Unmounting /var/opt/sun/jet/js_media/pkg
Unmounting /var/opt/sun/jet/js_media/patch
Running additional install files for reboot z
BASE_CONFIG: Running 001.base_config.001.enabledns
BASE_CONFIG: Set DNS domain to test.internal.bigpond.com
BASE_CONFIG: Add DNS server 192.168.100.14
BASE_CONFIG: Add DNS searchpath test.internal.bigpond.com bigpond.com
SDS: Running 002.sds.001.attach_user_mirrors
ZONES: Running 003.zones.001.postinstall
ZONES: Setting up zone hostf01-zone1
Jan 9 17:13:49 hostf01 last message repeated 3 times
ZONES: Setting up zone hostf01-zone2
ZONES: Setting up zone hostf01-zone3
ZONES: Setting up zone hostf01-zone4

JET host hostf01

2008-01-10T04:13:54Z

Jetmark:

2008-01-10T03:05:27Z

Jetmark:

[[Main Page|Parent]]

== JET Installation ==

Get the software from the [http://www.sun.com/bigadmin/content/jet/ JET website]. 
Current version of JET (as at 4th December 2007) is version 4.4.

Copy the software to /var/tmp on your jumpstart server.

[[Public_JET_Installation_Packages|Install the JET packages]]

Setup your PATH variable. Add /opt/SUNWjet/bin and /boot/grub/bin to it.

jumphost:/ root# '''env | grep ^PATH'''
PATH=/usr/local/bin:/bin:/usr/ccs/bin:/etc:/usr/etc:/usr/bin:/usr/local/X11/bin
/usr/bin/X11:/usr/local/agents/bin:/usr/proc/bin:/usr/openwin/bin:/usr/local/sites/bin
/usr/local/sbin:/usr/local/etc:/opt/SUNWspro/bin:/usr/sbin:/opt/RICHPse/bin
/usr/local/lib/netscape:/usr/ucb:/usr/local/etc/ipf:/usr/dt/bin:/usr/platform/sun4u/sbin
/usr/lib/osa/bin:/opt/SUNWjet/bin:/boot/grub/bin:.

Check your umask. It should be 22.

jumphost:/ root# '''umask'''
22

Create the directories for JET and DHCP. Adjust patchnames for your site. Note these pathnames are used in the scripts and commands etc, so search and replace if you need to.

jumphost:/ root# '''mkdir /data/dhcp'''
jumphost:/ root# '''mkdir /data/jumpstart'''
jumphost:/ root# '''mkdir /data/jumpstart/media'''
jumphost:/ root# '''mkdir /data/jumpstart/patches'''
jumphost:/ root# '''mkdir /data/jumpstart/pkgs'''

Install and run the [[Public_Jet_Config_Script|jumpstart configuration script]] to setup the jumpstart environment.

jumphost:/ root# '''chmod 755 /var/tmp/jumpstart_config.pl'''
jumphost:/ root# '''/var/tmp/jumpstart_config.pl'''

Transfer the Solaris media from the DVD into the jumpstart tree.

jumphost:/ root# '''copy_solaris_media -d /data/jumpstart/media/sol_10_807_x86 -n OS10_X86_807 /cdrom/sol_10_807_x86'''
Copying Solaris image....
Verifying target directory...
Calculating the required disk space for the Solaris_10 product
Calculating space required for the installation boot image
Copying the CD image to disk...
Copying Install Boot Image hierarchy...
Copying /boot x86 netboot hierarchy...
Install Server setup complete

Added Solaris image OS10_X86_807 at the following location:
Media: /data/jumpstart/media/sol_10_807_x86

removing directory /data/jumpstart/media/2835

intel-jumphost:/ root# '''copy_solaris_media -d /data/jumpstart/media/sol_10_807_sparc -n OS10_SPARC_807 /cdrom/sol_10_807_sparc'''
sparc-jumphost:/ root# '''copy_solaris_media -d /data/jumpstart/media/sol_10_807_sparc -n OS10_SPARC_807 /cdrom/sol_10_807_sparc/s0'''
Copying Solaris image....
Verifying target directory...
Calculating the required disk space for the Solaris_10 product
Calculating space required for the installation boot image
Copying the CD image to disk...
Copying Install Boot Image hierarchy...
Install Server setup complete

Added Solaris image OS10_SPARC_807 at the following location:
Media: /data/jumpstart/media/sol_10_807_sparc

removing directory /data/jumpstart/media/7328

Verify the media copy
jumphost:/ root# '''list_solaris_locations'''
Version Location
------- --------
OS10_X86_807 /data/jumpstart/media/sol_10_807_x86
OS10_SPARC_807 /data/jumpstart/media/sol_10_807_sparc

Add software for explo module. Note the jumpstart_config.pl script above will have altered the JET settings so that Sun Explorer 5.10 will work.

Copy Sun explorer software to /var/tmp/explo
drwxr-xr-x 4 root root 512 Dec 6 18:17 SUNWexplo/
drwxr-xr-x 4 root root 512 Dec 6 18:17 SUNWexplu/

jumphost:/ root# '''pkginfo -d /var/tmp/explo -l | egrep <nowiki>'(PKGINST|VERSION)'</nowiki>'''
PKGINST: SUNWexplo
VERSION: 5.10,REV=2007.09.20.19.12
PKGINST: SUNWexplu
VERSION: 5.10,REV=2007.09.20.19.12

jumphost:/ root# '''copy_product_media explo 5.10 /var/tmp/explo sparc'''
jumphost:/ root# '''copy_product_media explo 5.10 /var/tmp/explo i386'''
Transferring <SUNWexplo> package instance
Transferring <SUNWexplu> package instance
Packges copied.

jumphost:/ root# '''list_product_versions'''
Product Versions
------- --------
explo 5.10

Add software for custom module.

jumphost:/var/tmp/sol10-x86 root# '''pkgtrans sudo-1.6.8p9-sol10-intel-local . SMCsudo'''
Transferring <SMCsudo> package instance

jumphost:/var/tmp/sol10-x86 root# '''copy_custom_packages /var/tmp/sol10-x86 i386 SMCsudo'''
Transferring <SMCsudo> package instance
Packages copied

jumphost:/var/tmp/sol10-sparc root# '''pkgtrans sudo-1.6.8p12-sol10-sparc-local . SMCsudo'''
Transferring <SMCsudo> package instance

jumphost:/var/tmp/sol10-sparc root# '''copy_custom_packages /var/tmp/sol10-sparc sparc SMCsudo'''
Transferring <SMCsudo> package instance
Packages copied

Tune the base_config template. Be sure to quote the timezone field as shown.

jumphost:/etc/ssh root# '''vi /opt/SUNWjet/Products/base_config/solaris/base_config.conf'''
base_config_client_allocation="dhcp grub"
base_config_sysidcfg_root_password="PaSsWoRd"
base_config_sysidcfg_timezone=\"GMT+10\"
base_config_sysidcfg_system_locale=en_AU.ISO8859-1
base_config_sysidcfg_timeserver=192.168.100.14
base_config_x86_console="ttya"
base_config_x86_disable_kdmconfig="yes"
base_config_profile_cluster=SUNWCall
base_config_profile_swap=4096
base_config_profile_s4_mtpt="/data"
base_config_profile_s4_size="free"
base_config_profile_s5_mtpt="/var"
base_config_profile_s5_size="40960"
base_config_profile_del_packages="SUNWimagick SUNWpmowu SUNWgnome-search-tool"
base_config_profile_del_clusters="SUNWCpm SUNWCpmx SUNWCdial SUNWCdialx SUNWCaudd SUNWCstaroffice
SUNWCpostgr SUNWCpostgr-dev SUNWCpostgr-82 SUNWCpostgr-82-dev SUNWCsppp SUNWCmoz SUNWCmozdeveloper
SUNWCbrowser SUNWCbrowserdev SUNWCgna11y SUNWCgna11ydev SUNWCgnapps SUNWCgndev SUNWCgnex SUNWClx
SUNWCxscreensaver SUNWCthai SUNWCGtk SUNWCzebra SUNWCevo SUNWCevodev SUNWCsip SUNWCmco SUNWCsmc SUNWCwbem"
base_config_notrouter="yes"
base_config_dns_domain="test.example.com"
base_config_dns_nameservers="192.168.100.14"
base_config_dns_searchpath="test.example.com example.com"
base_config_enable_rootlogin="yes"
base_config_nfsv4_domain="test.example.com"

Tell JET about the subnets it will control

/opt/SUNWjet/etc/server_interfaces
192.168.205.0 255.255.255.192 192.168.100.14
192.168.174.64 255.255.255.192 192.168.100.14
192.168.204.0 255.255.255.192 192.168.100.14

Define the subnets in the JET defaultrouters file

/opt/SUNWjet/etc/defaultrouters
192.168.174.64 255.255.255.192 192.168.174.65
192.168.204.0 255.255.255.192 192.168.204.1
192.168.205.0 255.255.255.192 192.168.205.1

Setup DHCP subsystem. Will be site specific for your subnets.

jumphost:/ root# '''dhcpconfig -D -r SUNWfiles -p /data/dhcp'''
Created DHCP configuration file.
Created dhcptab.
Added "Locale" macro to dhcptab.
Added server macro to dhcptab - nsch1mang01.
DHCP server started.

jumphost:/ root# '''dhcpconfig -N 192.168.174.64 -m 255.255.255.192 -t 192.168.174.65'''
jumphost:/ root# '''dhcpconfig -N 192.168.204.0 -m 255.255.255.192 -t 192.168.204.1'''
jumphost:/ root# '''dhcpconfig -N 192.168.205.0 -m 255.255.255.192 -t 192.168.205.1'''
jumphost:/ root# '''dhtadm -A -m PXEClient:Arch:00000:UNDI:002001 -d <nowiki>':BootFile="nbp.SUNW.i86pc":BootSrvA=192.168.100.14:'</nowiki>'''

You need to set the DHCP config files to use the floating interface only.
The default binding to the physical interfaces will break things.
This might already have been done in the host set up recipe.

jumphost:/ root# '''svcadm disable dhcp-server'''
jumphost:/ root# '''echo "INTERFACES=nge0:1" >> /etc/inet/dhcpsvc.conf'''
jumphost:/ root# '''echo "ICMP_VERIFY=TRUE" >> /etc/inet/dhcpsvc.conf'''
jumphost:/ root# '''echo "BOOTP_COMPAT=automatic" >> /etc/inet/dhcpsvc.conf'''
jumphost:/ root# '''svcadm enable dhcp-server'''

Setup each host template and client config

<DL><DD>HOSTA   [[Public_JET_host_hosta01|hosta01 X4200]]     [[Public_JET_host_hostas1|hostas1 X4200]]</DD><DL></DD><DL>
<DL><DD>HOSTD   [[Public_JET_host_hostd01|hostd01 T2000]]     [[Public_JET_host_hostd02|hostd02 T2000]]</DD><DL>
<DL><DD>HOSTF   [[Public_JET_host_hostf01|hostf01 T2000]]</DD><DL>

When the hosts boot up they will issue a number of SUNWfmd messages as the various machine state changes are extracted from the hardware and logged. These can be ignored as they are historical and will cease once they have been worked through.